Attachments
for Nos. 196, 196M Series Test Indicators
Browse Brands: |
| Calibration Services |
Part Number |
Photo |
Description |
|||
|
 |
*Clamp - With a 1 5/16" (33 mm) flat or round capacity, 5/16" (8 mm) post used with No. PT18718 Snug |
|||
|
 |
*Tool Post Holder - 3/8" x 3/4" x 6" (9.5 x 19 x 150 mm) with upright spindle 5/16" dia. x 4 1/2" length (8 x 114 mm). Use with No. PT18718 Snug. |
|||
|
 |
*Snug (Sleeve) Complete - Post hole has a 5/16" diameter (8mm) and 3/32-1/4" (2.4-6.3 mm) holding capacity. Can be used on our No. 252 Height Transfer Gage, Nos. 57 and 257A and B Surface Gages, on No. 657A Magnetic Base and Swivel Post Assembly. |
|||
|
 |
Snug (Sleeve) Complete - Post has a 3/8" diameter (9.5mm) and 3/32-1/4" (2.4-6.3mm) holding capacity. Can be used with our Nos. 57 and 257C and D Surface Gages and No. 657AA Magnetic Base with upright post. |
|||
|
 |
*Hole Attachment - Lets indicator be used over obstructions and inside holes to a depth of approximately 1 5/8" (40 mm). |
|||
|
 |
Shock Absorbing Anvil |
|||
|
 |
Universal Snug - With spindle hole diameters 5/16", 3/8" (8, 9.5 mm) and gripping hole diameters 9/64", 5/32", 3/16", 1/4" (3.5, 4, 4.8, 6.3 mm). |
|||
|
 |
Universal Snug - With spindle hole diameters 1/4", 5/16", 3/8" (6.3, 8, 9.5 mm). Gripping hole diameters range from 3/32-1/4" (2.4-6.3 mm). |
© 2004 gagesgalore.com All Rights Reserved.
Ecommerce system powered by the DXCART Solution. DXCART © Copyright 1996-2004 DXStorm Inc. All Rights Reserved. DXCART is a trademark of DXStorm Inc. |
