| Detailed diagrams available |
| |
| PH10M |
The PH10M motorized probe head has been developed for the new generation of contact and non-contact scanning probes. It has 3 times the torque, allowing probe extension bars up to 300mm long to be used.
The PH10M has an autojoint mounting.
Cycle Time: (90° move): 3.5 seconds
Total Angular Movement:
A Axis: 105° -0° in 7.5° steps = 15 positions
B Axis: ±180° in 7.5° steps = 48 positions
Total Number of positions: 720
Maximum Extension Bar Length: 300mm using PAA3 extension
Head Mounting: Shank to suit your CMM
Probe Mounting Facility: Autojoint
Probe Head Control: PHC10-2 (purchased separately)
|
|
|
Part Number |
Description |
Price |
Add To Cart |
A-1025-0050
|
|
$20,787.00 |
|
|
Top |
| |
| PH10MQ/MQH |
The PH10MQ/MQH models can be mounted inside the CMM's quill for a greater working envelope by increasing the Z azis travel.
Q= Vertical Quill Mounted
H= Horizontal Quill Mounted
|
 |
|
Part Number |
Description |
Price |
Add To Cart |
A-1036-0001
|
|
$20,787.00 |
|
|
| Top |
| |
| MH8 |
MH8 (Manual Indexable Head) - A manually indexable probe head with repeatable indexing eliminates the need to re-qualify stylus tip position after orientation. The MH8 can be used with TP6 probe directly or TP2 probe with up to 50mm extension. Easy upgrade because there is on need for special software, cabling, or electronics.
Probe Status Indication: 1 LED
Cable Connection: 5 pin DIN type connector
A Axis Indexing: 0° to 90° in 15° steps = 7 postions
B Axis Indexing: ± 180° in 15° steps = 24 postions
Total Number of Postions: 168
Maximum Support Capability: TP6 mounted directly, TP2 with PEL1 50mm extension
Probe Mounting: M8 Bush
Mounting Options: Shank to suit your CMM |
|
|
Part Number |
Description |
Price |
Add To Cart |
A-1332-0002
|
|
$3,215.75 |
|
|
| Top |
| |
| MIH |
MIH - A manually indexable head, repeatable in 720 positions over two axes with LCD display. The MIH is designed for use with the autojoint TP6A touch probe and long extensions for large components. TP2, TP6, and TP20 touch probes can be used with the addition of the PAA1 autojoint.
Probe Status Indication: 1 LED
Cable Connection: 5 pin DIN 180° socket
A Axis Indexing: 105° - 0° in 7.5° steps = 15 postions
B Axis Indexing: ± 180° in 7.5° steps = 48 postions
Probe Mounting: Autojoint
Mounting Options: Shank to suit your CMM |
|
|
Part Number |
Description |
Price |
Add To Cart |
A-1070-0003
|
|
$6,437.20 |
|
|
| Top |
| |
| MIH-S |
The MIH-S is a derivative of the well established MIH design with enhanced functionality to provide feedback of status and lock position over a RS232 serial communications link.
Probe Status Indication: 1 LED
Cable Connection: 12 pin hirose connector
A Axis Indexing: 105° - 0° in 7.5° steps = 15 postions
B Axis Indexing: ± 180° in 7.5° steps = 48 postions
Probe Mounting: Autojoint
Mounting Options: Shank to suit your CMM
|
|
|
Part Number |
Description |
Price |
Add To Cart |
A-1373-0001
|
|
$7,403.35 |
|
|
| Top |
