- Inch/Metric – operator selectable with switchable resolution.
- Normal / Reverse Sensing
- Preset capabilities
- “Absolute” Transducer always remembers its location, even if power is off.
- High resolution digital readout and analog bar graph
- Lightweight, contamination resistant – ruggedly built to withstand hard use – gasketed case, crystal and stem assemblies resist fluid contamination.
- Marconnect data output: USB, OPTO RS232C, Digimatic
- Auto-power down – provides extremely low battery consumption
- Unilateral Tolerances
- Go/NoGo Display Feature
|
 |
Mode A:
Actual value + bargraph
Display of tolerance |
Mode B:
GO/NOGO display
|
 |
 |
|
Advanced Functions:
- Dynamic mode operation:
- Max, Min, TIR
- Two point difference measurement – provides comparison of two readings or measuring locations.
- Calculate the distance between 2 measured values
- Multiplier factor for ratio measurements
- Hold function – holds reading on display until ready to resume measuring
- Data output with serial number identification capability
- Data output with selectable continuous output
- or single request of reading(s)
|
| Technical Data: |
| Display Range: |
±0.042in
±1.067mm |
| Spindle Range: |
-0.050 to +0.060in.
-1.25 to 1.50mm |
| Resolution: |
0.00001in
0.0002mm |
Accuracy:
(% of range) |
±0.020” range: 50µin (0.25%)
±0.040” range: 200µin (0.50%)
±0.5mm range: 1.25µm (0.25%)
±1.0mm range: 5.0µm (0.50%) |
| Gaging Force: |
3 to 4 oz /
85 to 122 g
- at center of travel |
| Weight: |
6 oz (170 g) |
| Spindle Velocity: |
Unrestricted |
| Operating Temp: |
40° to 130°F/
5° to 54°C |
| Storage Temp: |
0° to 140°F/
-17° to 60°C |
| Repeatability: |
± 1 LSD (Least Significant Digit) |
| Battery Life: |
6000 hours (12 months normal usage) |
| Contact Point: |
(PT-223 radiused tip, 4-48 thread,
furnished on 0.375” dia. Stem model)
EPT-1037-W1 radiused tip, M2.5 thread
furnished on 8mm dia. stem model |
| Power: |
3 volt lithium coin cell (2 per unit),
type CR 2450. Order#: EBY-1018 |
| Display: |
Rotates through 270° |
|
 |
 |
Standard Model |
Perpendicular Model |
Dimensions: |
A |
B |
C |
11.7mm/0.46” |
24.1mm/09.5” |
53.6mm/2.11” |
38.0mm/mm/1.50” |
57.2mm/2.25” |
86.6mm/3.41” |
|
|
| |
Model |
Range |
Resolution |
Accuracy
% of digital range |
Stem
diameter |
Stem Length |
PN: 2034101 |
Price: $345.00 |
|
|
Standard |
±1.00mm/±0.040” |
|
±0.25% over
±0.50mm/±0.020”
±0.50% from
±0.50mm/±0.020”
to
±1.00mm/±0.040”
|
0.375” |
11.7mm/0.46” |
PN: 2034103 |
Price: $345.00 |
|
|
Standard |
0.0002mm/0.00001” |
0.375” |
38.0mm/1.50” |
PN: 2034105 |
Price: $345.00 |
|
|
Standard |
0.0005mm/0.00002” |
8mm |
11.7mm/0.46” |
PN: 2034107 |
Price: $345.00 |
|
|
Standard |
0.001mm/0.00005” |
8mm |
38.0mm/1.50” |
PN: 2034201 |
Price: $432.00 |
|
|
Advanced |
0.002mm/0.00001” |
0.375” |
11.7mm/0.46” |
PN: 2034203 |
Price: $432.00 |
|
|
Advanced |
0.005mm/0.0002” |
0.375” |
11.7mm/0.46” |
PN: 2034205 |
Price: $432.00 |
|
|
Advanced |
0.01mm/0.0005” |
0.375” |
38.0mm/1.50” |
PN: 2034207 |
Price: $432.00 |
|
|
Advanced |
0.02mm/0.001” |
8mm |
11.7mm/0.46” |
PN: 2034401 |
Price: $432.00 |
|
|
Advanced Perpendicular |
|
8mm |
38.0mm/1.50” |
|
| |
| Accessories: |
Part Number |
Description |
Price |
Add to Cart |
| Backs: |
| EBK-1018 |
Flat Black (Standard on all models) |
$6.75 |
|
| EBK-1010 |
lug Back (horizontal / Vertical) |
$27.50 |
|
| EBK-1012 |
post Back (0.5” dia. x 1” long) |
$45.50 |
|
| EBK-1013 |
screw Back (11/16” dia x 0.5”, 1/4-28 thread) |
$45.50 |
|
| EBK-1016 |
adj. slide Back (0.5” slot, 1/4-20 thread) |
$45.50 |
|
| Data Interface: |
| 4346023 |
USB cable (for MarCom or PC, 2m length) |
$92.65 |
|
| 4346020 |
RS232 cable (10pin plug, 2m length) |
$68.85 |
|
| 4346021 |
digimatic cable (10pin plug, 2m length) |
$69.70 |
|
| 2121369 |
transmitter (Mahr t, used w/ FM1 Receiver) |
$469.20 |
|
| Other Hardware: |
| ECV-1307-W2 |
splash cover |
$5.75 |
|
| BU-197 |
adaptor Bushing (8mm to 3/8”) |
$21.00 |
|
| AD-185 |
thread adaptor (M2.5 to 4-48 thread) |
$20.00 |
|
| SP-351 |
spring (for lighter gaging force: 35g) |
$15.50 |
|
|
| |
